Our Conversion kit includes everything needed to covert your 2007 6 Speed FLH/FLT belt drive to a heavy duty 530 O-ring chain
This kit is for stock width tires
24T Front Sprocket and 49T Rear Sprocket is equivalent to the stock belt drive gearing.
24T/ 51T Rear Sprocket= 3% Lower
24T/ 48T Rear Sprocket= 3% Overdrive
25T/48T Rear Sprocket= 7% Overdrive
Includes items Below:
6 Speed Transmission Sprocket
- Heat Treated Steel
- 24 Tooth
Steel Rear Wheel Sprocket
- Full .350 thickness for 530 Chain, beware of other thin .25 thickness sprockets out there.
- Steel Sprockets last longer than aluminum sprockets and are ideal for high load situations (Burnouts, Wheelies, High Horsepower Engines)
- Black Powdercoat Steel
- 48, 49, or 51 Tooth Available
Pulley Spacer
- Spacers have locating diameters to center sprocket perfectly on wheel.
- Correct size for your bike
Ultra Coated Grade ‘8’ Hex Head Bolts for Rear Sprocket
- 5 Grade ‘8’ Hex Head Bolts
- Five times as corrosion resistant as standard zinc-plated screws.
- With Lock Washers
We have 3 Grades of Sealed Chains available:
- Standard O-Ring Chain
- X-Ring Seal- Longer Lasting Seal, Same Strength as O-Ring
- BMZR- Sealed Drag Race Chain, Strongest Available and recommended for all baggers.
Chain Info:
530 O-Ring(BMOR) Chain
- 9,700lbs Tensile Strength
- Includes Rivet Master Link
- Component designs optimized with computer analysis provides higher tensile strength.
- Specially controlled heat treatment means tougher material.
- Reinforced roller offers higher impact resistance and longer durability.
-
Available in Natural, Black, Gold or Black/Gold
530 X-Ring (BMXR) Chain
- 9,700lbs Tensile Strength
- Offering 1.5 to 2x longer wear resistance than regular O-ring chains.
- Each refined component, designed with computer analysis, provides higher tensile strength.
- Specially controlled heat treatment means tougher material and more durability.
- Quad seal ring and reinforced pin and roller provide superior wear resistance, higher impact resistance and fatigue strength.
-
Quad seal ring offers less friction, which minimizes power loss, almost half that of standard O-ring chain.
530 High Strength BMZR Chain- Recommended for all baggers
- 11,200lbs Tensile Strength
- Includes Rivet Master Link
- Specifically developed for today’s high-performance sport machines.
- High-quality components coupled with a factory-greased seal ring ensures superior rigidity.
- High-tensile steels used throughout the chain components; larger pins mean loads spread out over wider area, resulting in longer life and more strength.
- Specially controlled heat treatment means tougher material and more durability.
- Available in Chrome, Black, Gold or Black/Gold
530 EK 3D Chain- High Strength, Recommended for all baggers
3D
parts are precisely manufactured, leading to a greater improvement of
transmission efficiency, better acceleration and efficient engine work.
Features an original special plate with a lightening hole. EK creates a
hole on both ends of a pin to lighten the chain without weakening the
plate according to computer analysis. The edge-cut inner plate reduces
friction and realizes smooth engagement with sprocket. This plate
enables the chain to be light, removes mud from the hole and dissipates
heat effectively.
- 11,400lbs Tensile Strength
- Includes Rivet Master Link
- Reduced friction
- Chromium carbide pin with lighten hole in end
- Inner plate with lighten hole
- Dimpled outer plate.
- QX-2 ring
***IF YOU DONT SEE A SPROCKET OR CHAIN OPTION IN THE DROP DOWN MENUS IT MEANS WE ARE OUT OF STOCK OF THAT SPROCKET OR CHAIN***
Dalton A (verified owner) –
Not sure what the guy below is talking about. Dished sprockets always fish out. Quality on my kit was top notch. Quick install with a YouTube video. I called about my order and they swapped a sprocket ghg at was holding up the order with in stock and 2 day shipped FREE. Infact i have just purchased another 55t sprocket because of the quality and EXCELLENT customer service.
Steven Collins (verified owner) –
Great upgrade from belt, very high quality, recommended for any high horsepower build.
Hunter Shumate (verified owner) –
I’ve ran this exact kit for almost two years of straight up abuse. Super easy to install. The only complaint I have is that there aren’t more sprocket sizes available. I would like to be able to hear reduct farther than 3%.