25mm Bearing Conversion for 3/4" & 1" Rear Wheels 25mm Bearing Conversion for 3/4" & 1" Rear Wheels $49.00
Stock Wheel Bearing and Sleeve Kits 3/4" , 1" & 25mm Stock Wheel Bearing and Sleeve Kits 3/4" , 1" & 25mm Price range: $39.00 through $49.00

25mm Bearing Conv. for 1″ & 3/4″ Wheels to 49mm Dyna Front Ends

$64.00

Part #: 4706
 Categories: , , Brand:

This Kit converts your 2000-2007 Narrow Front Mag Wheel with 3/4 or 1″ Bearings to the correct width for 49mm Narrow/Mid Front Ends
Has correct axle & disc spacers to match OEM 25mm Wheel.
Wheel will drop in place of your stock 49mm wheel with this setup.

Please note this is not for 49mm WIDE Glide Front Ends(FXDWG)

Includes:
2- 25mm Bearings
2- Axle Spacers
1- Inner Sleeve
1 or 2 Brake Disk Spacers(Single or Dual Disk)
5 or 10 Stainless Steel Torx Bolts(Single or Dual Disk)
Instructions

Note: Wheels that came with 3/4″ bearings will need about 1/4″ ground/drilled out of the hub.
This kit will not work on sportster wheels that came with 25mm bearings(2008-Up) Use kit #4746
If your wheel has no bearings in them the best way to tell these apart is to measure the bearing bore depth.

(2 customer reviews)

In stock

Add to Cart
25mm Bearing Conv. for 1" & 3/4" Wheels to 49mm Dyna Front Ends
25mm Bearing Conv. for 1" & 3/4" Wheels to 49mm Dyna Front Ends
$64.00
25mm Bearing Conv. for 1" & 3/4" Wheels to 49mm Dyna Front Ends
25mm Bearing Conv. for 1″ & 3/4″ Wheels to 49mm Dyna Front Ends
$64.00


    This Kit converts your 2000-2007 Narrow Front Mag Wheel with 3/4 or 1″ Bearings to the correct width for 49mm Narrow/Mid Front Ends
    Has correct axle & disc spacers to match OEM 25mm Wheel.
    Wheel will drop in place of your stock 49mm wheel with this setup.

    Please note:
    This is not for 49mm WIDE Glide Front Ends(FXDWG)
    For 2006-07 Dyna Front wheels See kit #4783
    For sportster wheels that came with 25mm bearings(2008-22) Use kit #4746

    Includes:
    2- 25mm Bearings
    2- Axle Spacers
    1- Inner Sleeve
    1 or 2 Brake Disk Spacers(Single or Dual Disk)
    5 or 10 Stainless Steel Torx Bolts(Single or Dual Disk)
    Instructions

    Note: Wheels that came with 3/4″ bearings will need about 1/4″ ground/drilled out of the hub.
    If your wheel has no bearings in them the best way to tell these apart is to measure the bearing bore depth.

    2 reviews for 25mm Bearing Conv. for 1″ & 3/4″ Wheels to 49mm Dyna Front Ends

    1. Alex (verified owner) –

      Awesome kit comes with everything you need to get a 13 spoke mag (after drilling the hub) on a street bob front end. Shipping was fast too.

    2. Francis (verified owner) –

      Don’t fit on my street bob with 13 spoke mag! the axel spacer don’t have good distance

    Only logged in customers who have purchased this product may leave a review.

    Customers also bought

    Related products