Rear Timken Bearing Wheel Conversion for 2005-Up Sportster

Adapts 1978-1999 3/4″ Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2005-Up Sportsters
Uses original bearings in the wheel.
Wheel will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disk & Sprocket or Pulley

Pair with our Front kit to do a set of wheels #4748

NOW AVAILABLE WITH QUAD SEALED BEARINGS
Timken bearing wheels have the bearings mounted much further inboard vs sealed bearing wheels.
The quad bearing setup makes the bearing load points on the axle wider (and closer to the swingarm). Increasing strength and reducing the possibilty of bent axles.
This is highly recommended if your going to beat on your bike.

Includes:
High Strength (Heat Treated) 17-4 Stainless Steel 3/4″ Axle made for 1″(2005-07) & 25mm(2008-up) Axle XL
Correct Axle Spacers
Special Adapter Spacer for Brake Caliper Mount
Grade 8 Axle Flange Lock-Nut
Adapters to use 2000-Up Sprocket/Pulley & Brake Disk