Rear Timken Bearing Wheel Conversion for 2018-Up Steetbob and Low Rider

Adapts 1978-1999 3/4″ Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2018-Up Streetbob, Fat bob & Low Rider Softails
Uses original bearings in the wheel.
Wheel will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disk & Sprocket or Pulley

Pair with our Front kit to do a set of wheels #4845

AVAILABLE WITH QUAD SEALED BEARINGS
Timken bearing wheels have the bearings mounted much further inboard vs sealed bearing wheels.
The quad bearing setup makes the bearing load points on the axle wider (and closer to the swingarm). Increasing strength and reducing the possibilty of bent axles.
This is highly recommended if your going to beat on your bike.

Includes:
  High Strength (Heat Treated) 17-4 Stainless Steel 3/4″ Axle made for 2018-Up Steetbob & Low Rider FXLR
  Correct Axle Spacers
  Special Adapter Spacer for Brake Caliper Mount
  Grade 8 Axle Flange Lock-Nut
  Adapter Pulley Spacer
  Adapter to use 2000-Up Brake Disk